Saltworx Off-Road & Marine Wash Instructions
STEP 1
Firstly park your vehicle or watercraft in a shady spot. If you only have a spot in the sun then make sure to do the wash in sections as you want to avoid it drying before you rinse.
Make sure to SHAKE WELL BEFORE USE
Then fill the Foam Gun / Cannon with around 800ml of water first. Then add 10:1 ratio of Saltworx Off-Road & Marine Wash.
STEP 2
Foam up your vehicle with Saltworx Foam Gun / Cannon to let Saltworx Formula work its magic on the salt & sand. Saltworx Off-Road & Marine Wash works straight away, so don't worry too much about waiting ages before rinsing off.
If your vehicle is covered in mud or extremely dirty we recommend using Saltworx Mud & Red Dirt Exterminator.
STEP 3
If required, use a Saltworx Microfibre Sponge to wash down vehicle. This will help break up any stubborn salt / dirt. We recommend doing this method even if the vehicle is reasonably clean as it gives the best finish.
This step is optional. Just make sure your sponge is always clean before using.
STEP 4
Disconnect the Saltworx Foam Gun Quick Release handle or High Pressure Foam Cannon and rinse down vehicle with water.
Start from the top of the vehicle and work your way down. This helps keeps the bits you have already rinsed clean.
STEP 5
Grab your Saltworx Twist Pile Microfibre Drying Towel to dry any left over water residue. This step will help with having no streaks or water marks left around vehicle.
Now sit back, grab a beer and admire how easy that was!
